Designed by Professionals

Sensor Skinz were designed by professionals who understand the needs of patients as well as dental practices.

FAQ

Learn more about Sensorskins, the revolutionary new product that makes patients happy by making X-rays comfy.

Collapsible content

What are Sensorskinz, and how do they work?

Sensorskinz are an innovative solution designed to make x-rays comfortable for patients. They work by providing smooth, comfortable, and unobtrusive padding to x-ray sensors. Custom cutouts are designed to slip over the bite tabs of existing sensor holding devices and around the sensor to cover all the edges and sides.

Sensorskinz™ is not intended to replace the plastic barrier or serve as a means of infection control isolation.  It may enhance the effectiveness of the barrier by reducing the likelihood of rips and tears.

Sterilize before use.

Dispose of the Sensorskinz if any part becomes cut, torn or deteriorates.  

It is not recommended to place Sensorskinz™ in an ultrasonic bath alongside sharp instruments, as they may scratch or damage the device during the cleaning process.

Instructions for Use:

  1. Cover the sensor and data cable with a protective plastic barrier.
  2. Select the appropriate sensor holding bite block based on the area you intend to image.
  3. Align the corresponding Sensorskinz™ cutout with the bite block's backplate.
  4. Insert the sensor (protected by the barrier) into the bite block.  Strech the Sensorskinz™ and pull it around the sensor until it fits snugly.
  5. Position the sensor inside the patient's mouth to capture the radiographs for that area, Change as needed for the next desired image.

Reprocessing Steps:

  1. Remove the Sensorskinz™ from the sensor holding device.
  2. Clean using an ultrasonic cleaning machine with enzymatic cleaners.
  3. Rinse thoroughly under running tap water.
  4. Ensure complete drying.
  5. Place in a sterilization pouch and position it in the center tray of the autoclave. Run the steam autoclave at 270°F (152°C) for 10 minutes at 80 PSI. 
  6. To preserve sterility, keep the Sensorskinz™ in the sealed pouch until ready for use.

What are the key benefits of Sensorskinz?

Sensorskinz offer a range of benefits,

  • The most important is higher patient satisfaction after a more comfortable x-ray session.
  • Sensorskinz securely holds the sensor on all four sides, preventing it from slipping out of the position the operator places it.
  • It's smooth soft surfaces protect the plastic barrier from ripping, tearing or getting holes, enhancing it's effectiveness in preventing cross contamination between patients.
  • Sensorskinz covers the corners and sharp seams of the plastic barriers, preventing irritation to the sensitive oral mucosa.
  • The white color of Sensorskinz offers a bright contrast with the mouth and teeth, making it easier to see where to place the sensor.
  • Sensorskinz is autoclavable and reusable, reducing overhead costs and environmental impact.

How do I use Sensorskinz?

Using Sensorskinz is simple and straightforward. Remove the aluminum stem from the plastic portion of the sensor holder, slip the cut out over the bite tab, and stretch the sensorskinz over and around the holder and sensor. Simply slip on your ‘skinz and go!  For detailed instructions, please refer to the user manual included with your purchase.

Are Sensorskinz suitable for all ages?

Yes! Sensorskinz are designed to be safe and effective for users of all ages.  they can be very helpful when obtaining dental X-rays on elderly individuals with thin and sensitive oral mucosa. Additionally they are useful when capturing images of partially edutulous patients.

However, currently Sensorskinz is solely compatible with size 2 sensors. Stay tuned for more size options in the near future!

What materials are used to make Sensorskinz?

Sensorskinz are crafted from high-quality medical grade silicone, and are known for their durability. Our product is thin enough to be radiolucent and thick enough to be reusable. Our product meets rigorous quality standards for your peace of mind.

Can Sensorskinz be cleaned easily?

Absolutely! As with all X-ray holding devices, Sensorskinz is considered a semi-critical instrument. As per CDC guidelines, they must be cleaned and sterilized between patients, or disposed of.

The product must be; processed in the solution of the ultrasonic machine, rinsed thoroughly, dried, inspected for defect or debris, packaged, labeled, run through the autoclave and stored in a manner to retain sterility. Avoid processing with loose sharps or abrasive materials that may damage the product. If the product becomes damaged discard.

Sterilize before use.

Dispose of the Sensorskinz if any part becomes cut, torn or deteriorates.  

It is not recommended to place Sensorskinz™ in an ultrasonic bath alongside sharp instruments, as they may scratch or damage the device during the cleaning process.

Reprocessing Steps:

  1. Remove the Sensorskinz™ from the sensor holding device.
  2. Clean using an ultrasonic cleaning machine with enzymatic cleaners.
  3. Rinse thoroughly under running tap water.
  4. Ensure complete drying.
  5. Place in a sterilization pouch and position it in the center tray of the autoclave. Run the steam autoclave at 270°F (152°C) for 10 minutes at 80 PSI. 
  6. To preserve sterility, keep the Sensorskinz™ in the sealed pouch until ready for use.

Do Sensorskinz come with a warranty?

Yes, we stand behind the quality of our product. Sensorskinz is backed by a 180-day warranty against defects in materials and workmanship. With normal use you can expect to reuse Sensorskinz for up to one year. We make no warranty regarding the longevity of the material beyond one year. Please refer to the warranty information included with your purchase for details on how to claim.

Are Sensorskinz eco-friendly?

We are committed to sustainability, and Sensorskinz is manufactured with eco-friendly practices in mind. Dentistry is rifve with single use items filling our trash bins. We take pride in the fact that Sensorskinz can be reused with proper cleaning and sterilzation procedures. Our packaging is minimal and 100% recyclable, reflecting our commitment to minimizing our impact on the environment.

I have more questions. How can I contact customer support?

We're here to help! If you have any further questions or need assistance, please don't hesitate to contact our friendly customer support team here. We're available to assist you.

Turn GRUMPY patients into HAPPY patients

Say goodbye to uncomfortable x-rays and hello to seamless, pain-free imaging sessions, ensuring a stress-free experience for your patients and enhanced efficiency for your team.

Warnings / Precautions

Sensorskinz™ is not intended to replace the plastic barrier or serve as a means of infection control isolation.  It may enhance the effectiveness of the barrier by reducing the likelihood of rips and tears.

Sterilize before use.

Dispose of the Sensorskinz if any part becomes cut, torn or deteriorates.  

It is not recommended to place Sensorskinz™ in an ultrasonic bath alongside sharp instruments, as they may scratch or damage the device during the cleaning process.

Instructions for Use:

  1. Cover the sensor and data cable with a protective plastic barrier.
  2. Select the appropriate sensor holding bite block based on the area you intend to image.
  3. Align the corresponding Sensorskinz™ cutout with the bite block's backplate.
  4. Insert the sensor (protected by the barrier) into the bite block.  Strech the Sensorskinz™ and pull it around the sensor until it fits snugly.
  5. Position the sensor inside the patient's mouth to capture the radiographs for that area, Change as needed for the next desired image.

Reprocessing Steps:

  1. Remove the Sensorskinz™ from the sensor holding device.
  2. Clean using an ultrasonic cleaning machine with enzymatic cleaners.
  3. Rinse thoroughly under running tap water.
  4. Ensure complete drying.
  5. Place in a sterilization pouch and position it in the center tray of the autoclave. Run the steam autoclave at 270°F (152°C) for 10 minutes at 80 PSI. 
  6. To preserve sterility, keep the Sensorskinz™ in the sealed pouch until ready for use.